The DC1100 Pro works better than other air quality sensors because it is a True Laser Particle Counter with real time readings. As air particles pass through the laser light source, the unit measures the amount of light the particles scatter when passing through the detection area. Calibrated with lower sensitivities than the regular DC1100, the Dylos DC1100 Pro is able to detect particulate matter in 2 concentration thresholds; small particles (down to 0.5 micron) and large particles (2.5 microns and above).
The DC1100 Pro air quality monitor is simple and easy to use. Just install your device at a location and height in the room where you want to test the air quality, plug it in and turn it on. Remember that concentrations of particulate matter can vary significantly from one room to the next within the same building, so it will be important to take more than one sampling. With the knowledge you gain from the DC1100-Pro, you’ll be able to take the steps necessary to improve your indoor air quality with either the purchase of an air purifier or an air cleaner.
The Dylos DC1100 Pro comes with a number of handy features. The Continuous mode displays the current levels of airborne particles, records the data for future analysis and a convenient bar graph shows the actual number and size of particles being detected. The Monitor mode takes a sampling of the ambient air for one minute every hour and the concentration thresholds are then displayed on the LDC screen. The Minute History mode allows you to see the data recorded over the past hour on a minute to minute basis. The Hour History mode lets you view the data recorded over the past day on an hour by hour basis. The Day History mode allows you to view the data recorded over the past month on a day by day basis. When interpreting the data, remember that the numbers are based on detected levels of airborne particles in .01 cubic foot of sampled air.
The DC1100-Pro is nearly maintenance free. While the unit is operating, spray a bit of canned compressed air into the back openings once a month to dislodge any dust and dirt. Dylos offers a 90 day limited warranty on material defects and workmanship. At their discretion, Dylos will either repair or replace the DC1100-Pro unit within the warranty period.
At A Glance:
110 AC Adaptor included
Minute/Hour/Day History Mode
90 day limited warranty
Height: 7 in.
Width: 4.5 in.
Depth: 3 in.
Capable of detecting the number and size of particles from bacteria, mold spore, dust, insect feces and smoke, these air quality sensors are ideal for any home, office or workshop. With a true laser particle counter and real time readings that can respond to a change in particle levels within 6 seconds, the units are able to detect particulate matter in 2 concentration thresholds; particle size will vary depending on the model.
Designed specifically for consumer use, the Dylos air quality sensors are affordable, simple to use and virtually maintenance free. With a number of convenient features, you will be able to take air samples hourly or continuously and view the data history in minute, hour or daily mode. Some models have a COM Port Interface allowing you to link the device to your laptop or PC to capture sampled data for future graphing and analysis.
With the knowledge you gain from your Dylos air quality monitor, you will be able to take the steps necessary to improve your indoor air quality with either the purchase of an Air Purifier or an Air Cleaner. If you already have one of these, a Dylos air quality sensor will let you know if the air purifier is doing the job it was meant to do.
All Dylos models come with a 90 day limited warranty on material defects and workmanship. At their discretion, Dylos will either repair or replace the unit within the warranty period.
Try a Dylos air quality Particulate monitor today.
If you're concerned about the quality of your indoor air then buy a Dylos indoor air monitoring device today.
Dylos DC1100 Pro air quality monitors